Correcting Parallax:
When the pointer appears on the focusing screen, the upper portion visible above the pointer will be cut off on the film. Be sure that the subject satisfactorily appears under the lower portion of this pointer. When using the camera on a tripod, use the Paramender (parallax correcting device) to ensure that the camera photographs the same image viewed on the focusing screen through simple operations.

Compensating Exposure:
As distance between the lens and film increases, image brightness on the film is reduced even though aperture size remains the same. Consequently, it is necessary to increase the exposure.

The figures on the focusing screen left side indicate the exposure factor. Compensate in the exposure after reading the figure indicated by the pointer while focusing. For instance, assuming that the correct exposure value measured by an exposure meter is 1/125 sec. at f/11,

compensate in the exposure as follows:

If the pointer indicates 2, 1/125 sec., f/8

or 1/60 sec., f/11

If the pointer indicates 3, 1/125 sec., between f/8 & f/5.6

or 1/60 sec., between f/11 & f/8